Steelcase Ology Desk & Bench Kurzanleitung Seite 27

Signal/Code
ISP
CON followed by ERR
For more error messages, see the detailed user guide at steelcase.com/eu-
en
Message
protection circuit has
been activated.
The system has
detected a collision.
The system has
detected a
connection error.
5 Errors and malfunctions
Required measure(s)
components have cooled
down.
Release all buttons and wait
until the drive back function
process is completed.
Release all buttons and wait
5 seconds. Then try again.
Disconnect the power
supply from the mains
connection. Then
disconnect the system from
the power supply. Re-
connect the system and use
it as usual.
EN
27