Operating And Adjusting; Safety Instructions - Steelcase Ology Desk & Bench Kurzanleitung

4 Operating and adjusting

4 Operating and adjusting

4.1 Safety instructions

The Ology may only be used and operated in perfect technical
condition and in compliance with the user guide.
Before first use and subsequent use after reassembly, ensure
the following:
EN
12
■
The desk has been properly assembled.
■
The motor cables of the control box are connected to
the control panel and motor.
■
The desktop must be level. If the desktop is not level,
first check that the floor is even. If the floor is
uneven, adjust the height using the adjusting screws
on the feet. If the desktop is still not level, you must
perform a manual reset of the desktop.
■
No persons or objects (e.g. open doors or windows)
must be within the lifting range or protrude into the
lifting range.
■
No persons must be on or sitting at the desk.
■
The maximum permissible desk load-carrying
capacity is not exceeded.