Errors And Malfunctions; Safety Instructions; Error Codes - Steelcase Ology Desk & Bench Kurzanleitung

5 Errors and malfunctions

5 Errors and malfunctions

5.1 Safety instructions

The following information always applies to resolving
problems:
DANGER
Electric shock due to electrical voltage!
Contact with voltage can cause severe injury or death due to
electric shock!
EN
NOTE
Risk of damage to electrical equipment!

5.2 Error codes

If the control panel does not work, a reset may be necessary.
To reset, proceed as follows:
24
}
Attach or detach connectors only when the
equipment is de-energised.
}
Rectify defects such as loose connections or
damaged cables immediately.
}
Avoid liquids near the sockets.
}
Do not open the housings of the following
components: Control box, columns, control panel.
}
Do not use the mains cable to pull the plug out of the
socket.
1.
Disconnect the control panel from the power supply.
2.
Wait 10 seconds.