VEVOR JS-HH12B Bedienungsanleitung Seite 14

convey capacity fulfills your requirements.
Start-up
Before connecting to the mains supply, be sure that the supply voltage is identical
with the value given on the rating plate.
 Unscrew the container from the spray gun.
 Aligning suction tube. (Fig. 2)
If the suction tube is positioned correctly, the container contents can be sprayed
without almost any residue.
When working on lying objects: Turn the suction tube forwards. (Fig. 2 A)
Spraying work when working on overhead objects: Turn the suction tube
rearwards. (Fig. 2 B)
 Set the container on a sheet of paper, pour in the prepared coating material and
screw the container tightly onto the spray gun.
 Put the machine on a level, clean surface. Otherwise the machine could tip
over!
 Adjust the spray setting on the spray gun.
Three different spray jet settings can be chosen on the spray gun,
depending on the application and target object.
Selecting the Spray Setting
Fig. 3 A = horizontal fat jet
Fig. 3 B = vertical fat jet
Fig. 3 C = circular jet
Adjusting the desired Spray Setting (Fig. 4)
Turn the air cap to the desired spray setting position.
The spray pattern indication can be found on the front part of the sprayer. With the
arrowhead towards the boss on the tip.( Fig. 4)
IMPORTANT! The air cap only can be turned at an angle . Do not
- 12 -