Interpump Group T5050 Bedienungsanleitung Seite 7

The manufacturer INTERPUMP GROUP S.p.A. – Via E. Fermi, 25 – 42049 S. ILARIO D'ENZA (RE) – Italy
DECLARES under sole responsibility that the product identified and described as follows:
Name: Pump
Type: Reciprocating plunger pump for high pressure water
Trademark:
INTERPUMP GROUP
Series:
47
Model:
T5050
complies with Machinery Directive 2006/42/EC.
Standards applied: UNI EN ISO 12100:2010 - UNI EN 809:2009
The pump identified above meets all the essential safety and health protection requirements as listed in
section 1 of Annex I of the Machinery Directive:
1.1.1 - 1.1.2 – 1.1.3 – 1.1.5 – 1.1.6 - 1.3.1 – 1.3.2 – 1.3.3 – 1.3.4 – 1.5.4 – 1.6.1 – 1.7.1 – 1.7.2 – 1.7.4 – 1.7.4.1 –
1.7.4.2
and the relevant technical documentation has been compiled in accordance with Annex VII B.
In addition, the manufacturer undertakes to make available, following a reasoned request, a copy of the
relevant technical pump documentation in the manner and terms to be defined.
The pump should not be put into service until the plant to which the pump is to be incorporated has been
declared in accordance with the provisions of the relevant directives and/or standards.
The technical file is created by the Interpump Group S.p.A., Via E. Fermi, 25 - 42049 S. Ilario d'Enza (RE)
Italy, as a legal person.
Person authorized to draw up the declaration:
Reggio Emilia 03/2025
DECLARATION OF INCORPORATION
(In accordance with Annex II of European Directive 2006/42/CE)
Giacomo Leo
Legal representative
Signature:
6