Electrical
safety rules
Equipment
safety rules
Application
Personnel
protection
safety rules
If the device has not been used for a long time or the
battery is completely depleted, it may not turn on proper-
ly. This is normal. Please replace the battery before
attempting to power on the device.
Never leave the device unattended while it is powered
on. Always turn off the device at the main switch when it
is not in use for its intended purpose!
Do not attempt to repair the device yourself.
Before connecting the device to power, check if the
voltage of the power supply battery matches the rated
parameters. Mismatched voltage may pose serious
hazards and damage the device.
It is essential to protect the device from rainwater,
moisture, mechanical damage, overload, and rough
handling.
Check the battery, connecting hoses, and adapters for
damage before use. If any damage is found, do not
operate the device.
Use the device only in compliance with all safety instruc-
tions, technical documents, and vehicle manufacturer
specifications.
If a supplement is needed, only use a brand new and
unopened compatible product.
The refrigerant used in the device may be harmful to
health, and any contact must be avoided.
Always wear safety goggles when using the device to
prevent possible splashes into the eyes. In case of
contact, rinse the eyes with flowing water for several
minutes while keeping the eyelids open. If symptoms
persist, consult a doctor.
4