Refrigeration Mode Measurement - Autool Lm70 Originalanleitung

Refrigeration
mode
measurement
●
Once the settings are complete, press the [
to return to the test interface.
The refrigeration mode is used to determine the following system
measurement values:
Parameter Name
LP
HP
EV
CO
1. Connect the clamp temperature probe.
● The clamp temperature probe must be connected before
starting the measurement instrument so that the instrument
can display the temperature.
● The digital temperature probe (accessory) must be connected
to measure the pipeline temperature.
Low-pressure real-time pressure
High-pressure real-time pressure
Refrigerant evaporation-pressure temperature
Refrigerant condensation-pressure temperature
14
] button again
Description