Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electrical safety rules
This is a machine that can only be powered by a power outlet
with a protective grounding conductor. Therefore, please
ensure that the machine/casing is properly grounded in
advance.
Do not twist or severely bend the power cord, as this may
damage the internal wiring. If the power cord shows any signs
of damage, do not use the spark plug tester. Damaged cables
pose a risk of electric shock. Keep the power cord away from
heat sources, oil, sharp edges, and moving parts. Damaged
power cords must be replaced by the manufacturer, their
technicians, or personnel with similar qualifications to prevent
hazardous situations or injuries.
Equipment safety rules
Never leave the equipment unattended while it is operating.
Always turn off the equipment at the main switch and discon-
nect the power cord when the equipment is not being used for
its intended purpose!
Do not attempt to repair the equipment yourself.
Before connecting the equipment to power, check that the
battery voltage matches the value specified on the nameplate.
Mismatched voltage can cause serious hazards and damage
the equipment.
It is essential to protect the equipment from rainwater,
moisture, mechanical damage, overload, and rough handling.
Application
Check the power cord, plug connections, and adapters for
damage before use. If any damage is found, do not operate the
equipment.
Before using the product, check for any cracks in the casing or
missing plastic parts.
Use the equipment only in compliance with all safety instruc-
tions, technical documents, and vehicle manufacturer specifi-
cations.
4
Werbung
