Mode Switching - Autool Re110 Bedienungsanleitung

Mode Switching

● Key Frequency Detection Mode (RF)
Long press the [
on and enter the frequency detection mode. Place the key
near the key testing area, press the key button to test the
frequency of the key, and the screen will display the
frequency value. (Press the [
current test frequency).
● Battery Testing Mode (BAT)
Press the [
testing mode (BAT). Insert the battery to be tested into the
battery testing area, and the screen will display the battery
voltage.
NOTE
Pay attention to the positive and negative polarity markings
on the battery.
● Infrared Testing Mode (IR)
Press the [
testing mode (IR). Point the infrared remote controller to
this product and press the button to test. The screen will
display OK.
] power switch for 2 seconds to power
RF
] mode switch button to enter the battery
BAT
] mode switch button to enter the infrared
8
] power switch to clear the
MHz
V