Installing The Virtual Guard - Samsung SR8980 Benutzerhandbuch

Installing the VIRTUAL GUARD

You can confi ne the vacuum cleaning robot to a
particular section by using Fence (virtual wall) mode.
Forming a Fence (virtual wall)
VIRTUAL GUARD creates an invisible barrier that the vacuum
cleaning robot cannot cross.
E.g. in front of pots, furniture, the front door, and so on.
1. Turn the Fence (virtual wall) mode on using the Power
button.
- The mode lamp fl ashes red.
2. Install the VIRTUAL GUARD in front of the area you
want to block access from the vacuum cleaning robot.
- Install the VIRTUAL GUARD so that the distance detection
sensor can form an invisible barrier that the vacuum cleaning robot cannot cross.
26_ operating
Button operations
1. Lamp operations
- Fence (virtual wall) Mode: The red lamp fl ashes.
- Off :The lamp is turned off.
2. Turn the Power Button on
- Whenever you press the Power button, Fence (virtual wall)
mode ➝ Power off is selected in this sequence.
❈
The distance of virtual wall is 2.5m at minimum and may
differ depending on surroundings and movement status of
the robot.
Lamp Lamp
Distance Distance
Detection Detection
Sensor Sensor
A fence (virtual wall) is A fence (virtual wall) is
formed. formed.
Power Button Power Button
Main Body Main Body
Detection Detection
Sensor Sensor
Distance Distance
Sensor Sensor