Operation; Clean Station; Installing The Clean Station; Using The Clean Station - Samsung VS20A95-Serie Benutzerhandbuch

OPERATION

Clean Station

Installing the Clean Station

1 Run the power cord of the Clean Station along the round groove at the bottom.
– Make sure the power cord is correctly placed so that the Clean Station stands without tilting.
2 Before plugging in the Clean Station, arrange the power cord neatly.
3 When plugging in the Clean Station, the status indicator turns blue for 5 seconds and goes off.

Using the Clean Station

Status indicator /
(START/STOP)
button
• After inserting the vacuum cleaner into the Clean Station, press the START/STOP button to
empty the Dustbin.
– Press the START/STOP button again to stop its operation.
• Close the bottom cover of the Dustbin before using the vacuum as the bottom cover is open
after emptying Dustbin at the Clean Station.
14 English
❇ ❇ For detailed information,
please refer to the QR code.