Troubleshooting For Error Codes - Samsung SR8980 Benutzerhandbuch

TROUBLESHOOTING FOR ERROR CODES

ERROR CODE
•
•
•
•
•
•
•
•
•
❈
If you press the Start/Stop button or turn off the Power Switch, the error code is cleared.
50_ troubleshooting
CAUSE
Vacuum cleaning robot is
caught, stuck or trapped
while navigating.
A foreign substance (string,
paper, toy etc.) is caught in
the power brush.
A foreign substance (string,
paper, toy etc.) is caught in
the left driving wheel.
A foreign substance (string,
paper, toy etc.) is caught in
the right driving wheel.
Check the Bumper sensor.
A foreign substance (dust,
stain etc.) is on the Obstacle
sensor window.
A foreign substance (Dust,
stain etc.) is on the Cliff sensor
window.
Dust bin not inserted.
A foreign substance (String,
cloth etc.) is caught on the
edge-cleaning side rotating
brush.
SOLUTION
• Turn off the Power Switch at the bottom and
move the vacuum cleaning robot to a different
location.
• Turn off the Power Switch at the bottom and
remove the foreign substance from the power
brush.
• Turn off the Power Switch at the bottom and
remove the foreign substance from the left
driving wheel.
• Turn off the Power Switch at the bottom and
remove the foreign substance from the right
driving wheel.
• Turn off the at the bottom, and then remove
the obstacle from the front of the vacuum
cleaning robot or move it to a different location.
• Turn off the Power Switch at the bottom and
wipe the foreign substance from the front and
rear sensor windows using a soft cloth.
• Turn off the Power Switch at the bottom and
wipe the foreign substance on the cilff sensor
window with a soft cloth.
• Insert the dust bin until you hear a "Click"
sound.
• Turn off the Power Switch at the bottom and
wipe the foreign substance from the edge-
cleaning side rotating brush.