Spot Cleaning - Samsung SR8980 Benutzerhandbuch

Spot Cleaning

You can conveniently clean a specifi c area that has a a lot of
cookie crumbs, dust, and etc.
■
Move the vacuum cleaning robot to the location where you want to
perform a spot clean.
Main unit button
▶
2time 2time
- In Spot cleaning mode, the vacuum cleaning robot cleans an area
with a length of 1.5m and a width of 1.5m.
- When cleaning is completed, the vacuum cleaning robot will
display End, Stop, and Stand by.
When the vacuum cleaning robot is docked with the charger
station, spot cleaning is not supported.
NOTE
• Each time you press the Turbo button, the Turbo icon on
the display panel is turned on or off sequentially. When the
CAUTION
Turbo icon is turned on, you can start cleaning in Turbo
mode.
• Each time you press the Dust Sensor button, the Dust
Sensor icon on the display panel is turned on or off
sequentially. When the Dust Sensor icon is turned on, you
can start cleaning in Dust Sensor mode.
Remote control
button
1.
2.
Confi guration
Sequence
Set the mode.
Cancel the mode.
Dust Sensor Mode Dust Sensor Mode
Cleaning Complete Cleaning Complete
About 1.5m About 1.5m
Normal Mode Normal Mode
Turbo Mode Turbo Mode
operating _31