Display Panel - Samsung SR8980 Benutzerhandbuch

■

Display panel

DISPLAY PART
1. Number Display
- Shows the timer display, progress status, and error codes using numbers, letters and graphics.
2. Weekly Reservation
- When you set a weekly reservation to start cleaning from the specifi ed time on the specifi ed day
of the week, the icon for the selected day of the week is turned on.
3. Battery Level Indicator
- Charging : Shows the charging progress in 3 steps.
- In Use : Shows the battery charge level. The battery charge level is reduced by each level from
FULL while operating. (When the battery is fully discharged, one level will fl ash to display "Lo".)
4. Timer
- When cleaning is scheduled, the Timer icon is lit.
5. Dust Sensor Mode
- This icon turns on when Dust Sensor mode is enabled.
6. Turbo Mode
- This icon turns on when Turbo mode is enabled.
7. Cleaning Mode Display
- Each time the Cleaning Mode button is pressed, the corresponding cleaning mode is displayed.
(A) Auto Mode :
(B) Spot Mode :
(C) Max Mode :
BUTTON PART
8. Cleaning Mode
- Press to select a cleaning mode. After selecting a cleaning mode, press the (
start cleaning.
9. Start/Stop
- Press to start/stop cleaning.
10. Recharging
- When this button is pressed, The cleaning robot will return to the charger station to charge its
battery.
2 2
3 3
4 4
5 5
6 6
A A
8 8
This icon turns on when Auto cleaning mode is selected.
This icon turns on when Spot cleaning mode is selected.
This icon turns on when Max cleaning mode is selected.
B B C C
9 9 10 10
1 1
7 7
) button to
assembling _19