Installing The Virtual Guard - Samsung POWERbot Benutzerhandbuch

Installing the Virtual guard

Infrared ray from the Virtual guard will restrict POWERbot from approaching certain
area.
The distance of virtual wall is 2.5 m at minimum and may differ
depending on surroundings and movement status of POWERbot.
Press the Power
1
button to turn it on
Power lamp (Red) will blink.
Install the Virtual guard
2
where you want to restrict
POWERbot's entrance
Make sure that distance sensor is facing
at the desired direction you want to
create a invisible barrier (which will restrict
POWERbot's approach).
ENGLISH-12
Virtual guard