Get The Required Tools - Free2Move Esolutions Prowallbox Installationshandbuch

4.2.6.

Get the required tools

The list includes:
Torx screwdriver T20 1/4"
•
Phillips screwdriver (minimum length =160mm)
•
Slotted screwdriver (head < 2mm)
•
3x ø10x50mm wall plugs with screws
•
Drill with ø10 mm 3/8" bit
•
Cutter
•
Hammer
•
Pencil
•
Spirit level
•
Measuring tape
•
Adhesive tape
•
NOTE: The charger is provided with 2 box-cable sheath junctions that you can replace
with ø25mm cable glands (not included in the supply).
WARNING
Do not use an electrical screwdriver to assemble the charger or to
fix it to the wall. Free2move eSolutions S.p.A. declines any liability
for damage to persons or things arising from use of such tools.
26 of 84