Removing The Scanner From The Ring Scanner Base; Charging And Transfer Station Bfp1 & Bfp2 - Werock Rockscan W100 Betriebsanleitung

Removing the scanner from the ring scanner base

1. Press on the rear buckle
2. Press the device lightly and pull it out of the holder.
Charging and transfer station BFP1 & BFP2

Dimensions: 72 x 56 x 40.3 mm

Weight: 50 grams

Input voltage: 5V / 500 mAh

Charging capacity: 350 mA/h

Charging time: 2 hours (with a battery capacity of 550 mAh)

Connection: USB, DC input, DC output

Transfer mode: HID Keyboard, Virtual Serial Port (BFP1 only)
An optional charging station is available for the Rockscan W100 wearable scanner. This is available in two
configurations:
BFP1: Charging station including Bluetooth base station for transferring data
Rockscan W100 User Manual
201 / 231