Werock Rockscan W100 Betriebsanleitung Seite 193

Starting the update
1.
First press the trigger button on the Rockscan W100 and simultaneously press the "Update"
button in the app.
2.
The update process starts, which you can recognize by the fact that various status messages and
a loading bar are displayed, see image. You can release the trigger button as soon as the update
has started. Wait until the process is complete.
3.
Once the process has been successfully completed, you will see the message "Upgrade
Successfully" and a completely green loading bar.
The update is complete and you can set up and use the scanner again according to your needs.
Note: If the update fails, try again.
Rockscan W100 User Manual
193 / 231