Werock Rockscan W100 Betriebsanleitung Seite 191

Connecting the Rockscan W100 to the Android device
1.
Switch the Rockscan W100 to Bluetooth SPP mode. Information on the procedure can be found in
the operating instructions at
https://support.werocktools.com/w100/AuswahldesUbertragungsmodus.html
2.
Tap on "Search Bluetooth" and wait a moment until the app has completed the search and the
message "Stop Search" appears. You will see a list of the devices found.
3.
Select the scanner by name and tap the entry. By default, this is "EF02".
4.
Allow pairing when a corresponding prompt appears.
5.
Check whether the pairing was successful. You can recognize this by the fact that the LED of the
Rockscan W100 no longer flashes blue or lights up and the message "Connected" appears briefly in
Rockscan W100 User Manual
191 / 231