EINHELL TC-TW 100 Originalbetriebsanleitung Seite 9

Please note that our equipment
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial,
businesses or for equivalent
4. Technical data
Dimensions .
.......approx.
Net weight:
Max. load capacity:
Load capacity of the support area per drawer, see
Fig. 6.
5. Assembly
Important! To avoid malfunctions, please note
that all the drawers must be COMPLETELY
closed before you pull one out!
5.1 Fitting the handle
Fit the handle (3) with the screws (a) as shown in
Fig. 2.
5.2 Fitting the wheels
Fit the wheels (2) as shown in Fig. 3.
6. Before starting the equipment
Unlock the drawers by pushing down the locking
switch (4) located in the bottom drawer. (Fig. 4-5)
7. Cleaning and ordering
parts
7.1 Cleaning
Clean the tool trolley with a slightly damp cloth
and if necessary a small amount of conventional
paint cleaner. To avoid damaging the surfaces do
not use solvents or other aggressive
cleaning products.
indb 9
has not been de 7.2 Ordering
Please quote the following data when ordering
replacement
trade or industrial
purposes.
For our latest prices and information please go to
www.isc-gmbh.info
616 x 658 x 330 mm
. approx. 17.8 kg
8. Disposal
75 kg
The equipment
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment
made of various types of material, such as metal
and plastic. Never place defective equipment
your household refuse. The equipment should
be taken to a suitable collection
disposal.
such a collection point, you should ask in your
local
The reprinting
ans, in whole or in part, of documentation
papers accompanying products is permitted only
with the express consent of the iSC GmbH
Subject to technical changes.
spare
or scouring
-9
replacement parts:
parts:
Type of machine
Article number of the machine
Identification number of the
Replacement part number of the part required
and recycling
is supplied in packaging
and its accessories
If you do not know the whereabouts
council offices.
or reproduction by any other me-
machine
to pre-
are
in
center for proper
of
and
02.04.2019 11l55101