EINHELL TC-TW 100 Originalbetriebsanleitung Seite 8

Danger!
When using the equipment, a few safety pre-
cautions must be observed
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due
these instructions and the safety instructions.
1. Safety regulations
Danger!
Read all safety regulations
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fire and/or serious injury.
Keep all safety regulations
in a safe place for future use.
Additional safety instructions:
When loading and unloading the drawers, en-
sure that the tool trolley and the drawers are
evenly loaded.
It is prohibited to transport
tool trolley.
Apply the break when loading and unloading.
On slopes or uneven floors make sure that
the tool trolley does not topple.
When moving the trolley on slopes, hold it by
the handle
Make sure that the maximum
exceeded. (75 kg)
After transportation and/or assembly make
sure that all drawer compartments
pletely closed
For safety reasons the tool trolley is equipped
with pull-out stops for the drawers. This pre-
vents several drawers being opened at the
same time.
Always push the tool trolley to avoid injury!
Check for damage before use! Use the tool
trolley only if it is in a faultless and safe opera-
tional condition.
Any changes, modifications or additions to
the trolley are prohibited
Any use of accessories or spare parts which
are not expressly recommended
nufacturer can result in injury or damage.
Use only genuine accessories
indb 8
to avoid injuries and
2. Layout and items supplied
to a failure to follow
2.1 Layout (Fig. 1/2)
I.
2.
3.
4.
2.2 Items supplied
and instructions.
and instructions
persons with the Danger!
The equipment
not toys. Do not let children play with plastic
bags, foils or small
swallowing
total load is not
are com-
3. Proper use
The tool trolley is designed for mobile storage of
tools and small parts. It can be used indoors on a
variety of (firm and flat) floor coverings.
The equipment
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
by the ma-
ries of any kind caused as a result of this.
and spare
-8
parts.
The tool trolley is not a toy. Keep it out of
reach of children
Store it in a location which is not accessible
to children. The ideal storage temperature is
between 10 and 300C.
Tool trolley
Wheels
Handle
Locking switch
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available)
Check to see if all items are supplied
Inspect the equipment and accessories
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
and packaging
parts. There
or suffocating!
Handle
4 screws
2 wheels with brake
2 wheels without brake
Original operating instructions
is to be used only for its prescri-
for
material are
is a danger of
02.04.2019 11l55101