Clatronic MWG 731 H Bedienungsanleitung Seite 25

5....-05-MWG 731 H
Please note:
Individual Cooking Program
1. Please turn the TIME/MENU regulator to code number "07". The word "Code"
appears in the display.
2. Press the IND button. The stored time appears in the display.
3. In order to change the stored time, press the IND button again. Now use the
TIME/MENU regulator to set the desired cooking time.
4. Press the START button.
This time will now remain in the memory until you enter a new time or the mains
power supply is disconnected.
TIMER:
• Keep the CLOCK/TIMER button pressed for 3 seconds.
• Turn the TIME/MENU regulator to the desired time and this will then appear in
the display.
• Press the START button.
This program can be used parallel to the microwave program, the grill and the hot
air program.
Please note:
The maximum time that can be set is 95 minutes. The time which is counting down
remains visible in the display for 3 seconds. The clock or the cooking time then
reappears in the display. Once the set time has expired, a long sound is heard.
Press the CLOCK/TIMER button and then the STOP/RESET button in order to stop
the clock.
Child Lock
The child lock protects the device from being used by children without supervision.
The child lock is activated as follows:
Keep the STOP/RESET button pressed down for 3 seconds. A signal is heard and
the word "LOCK" appears in the display. All buttons are now blocked.
The child lock is deactivated as follows:
Repeat the above procedure. The word "LOCK" disappears.
Fast Start/Stop
You can use this setting for procedures which are often repeated. The microwave
then runs at 100%.
Press the START button at rapid intervals in order to set the cooking time. The
maximum switch-on time is limited to 10 minutes. The microwave starts automati-
01.08.2003 14:34 Uhr
Additional Practical Tips
Seite 25
25
GB