Input & Output - Caliber Rdd 773Bt Schnellstartanleitung

RDD 773BT
4 13 14 7 8
3
5
6
11 2 12 9 10
. d): turn the unit ON/OFF (longpush)
TFT: turn TFT screen ONIOFF (Shortpush)
2. Volume: rotary volume button
Audio menu: push to enter/turn to adjust
3. »l/l-«: next/previous track (disc/lJSB/SD/BT)
Hold: auto. scan up/down (tuner)
Push: manual step up/down (tuner)
4. MI : save/recall memory #1
OSD: show playback Menu (disc/US3/SD)
5. M2: save/recall memory #2
RPT: repeat options (disc/USB/SD)
6. M3: save/recall memory #3
IN T: intro play options (disc/USB/SD)
7. M4: save/recall memory #4
RDM: shuffle play options (disc,'USB/SD)
8. M5: save/recall memory #5
Stop: stop playback (disc/USB/SD)
Basic operation
Unit and TFT ONIOFF
Press the Q)button to turn the unit ON. When the unit is ON, press the d) button once to turn the TFT
OFF. Press this button again to turn the TFT back ON. Press and hold the
OFF.
Mode Selection
Press the [MODE] button to cycle the play mode between radio/USB/SD/disc/AUX/B/uet00th/AV/
A2DP (Bluetooth audio).
Sound Control
• Volume control: use the rotary button on the unit or the [VOL] buttons on the remote.
• Audio settings: Press the volume button to enter the menu and press continuously to scroll
through the options (Bass/Treble/Balance/Fader/Loud)
Note: When EQ is ON, treble control is not available.
Setup menu
Push the [MENU] button en choose (rotate and push the VOL button) SETUP.
• General: choose if you like the button beep to be ON or OFF.
• Clock: choose 24h or 12h (AMIPM) notification and set the time.
• Audio: to set MBP (left/right) / Loud (ON/OFF) / EQ (rock/pop/classic/OFF)
• Video: to set display Brightness / Contrast / Saturation / Hue.
• Function: to set Radio region (Europe/America/Japan/Russia)
Radio operation
GO to the radio mode using the [MOD] button.
Choose radio band
Use the [BAND] button to choose between FMI / FM2/ FM3 / AMI or AM2.
store up to six preset stations, for a total of 30 preset memory stations.
Set frequency
Push the buttons to go to the desired frequency step-by-step.
Push and hold the [»1/144] buttons to start a search to the next station.
Save frequency as preset
Search for the desired frequency/station, choose a preset number (1—6) push and hold that number
till the display shows PI—P6 under the frequency. To recall, push the desired preset number.
Automatic scan and store
If you are On one of the FM bands, push and hold the [APS] button. The unit will automatically scan
and save stations for all the 3 FM bands.
If you are on one of the AM bands, push and hold the [APS] button. The unit will automatically scan
and save stations for both AM bands.
List
Push the [LIST] button and use the [VOLI buttons to rotate through the presets and push to select.
Push and hold the [LIST] button to turn ON several radio RDS functions:
• PTY: program genre (several choices)
• AF: Automatic frequency (ONIOFF)
• TA: Traffic announcements (ON/OFF)
• ST: Stereo (ON/OFF)
• LOC: Local (Local/DX)
• LOUD: Loudness (ON/OFF)
DVD/VCD/CD/USB/SD operation
The unit has an USB port on the front panel, a disc slot behind the front panel (push [OPEN] to flip
the panel) and a SD card reader behind the front panel (push [OPEN] and remove the panel).
After inserting a disc/USB/SD with supported files (see specifications) the unit automatically will
change to the right mode, if not use the [MOD] button to choose the right mode.
Playback control
While playing push the [OSD] button to show the playback controls:
play/pause playback
stop playback
• previous/next track, chapter or image
• Z : repeat options
• * : shuffle playback
QUICKSTART GUIDE
15
ROO 77 ABT
ax 7 SW
16 19
9. M6: save/recall memory #6
PAU: pause playback (disc/USB/SD)
10. Remote (IR) sensor
11. Band: FMI/FM2/FM3/AM1/AM2
Green horn: Call pickup (connectedBT)
12. APS: show directory page (disc/USB/SD)
Red horn: end/refuse call (connectedBT)
13. MOD: change mode
14. CLK: show clock in display
15. List: go to preset stations list (tuner)
16. Menu: enter setup menu / open mode list
17.3" TFT display
18. Open: open front panel to change disc/SD
or to release.
19. AUX: 3.5mm Jack AUX-input
20. USB: standard USB input
button to turn the unit
and rotate to adjust/set.
/ Subwoofer (ON/OFF)
and RDS function (ONIOFF)
On each band you can
18 2 3
5
6
8
10
11
12
20
13
14
(tuner)
. U: power ON/OFF
2. MOD: mode select
3. "I: play/pause playback
4. MUTE: mute audio output
5. BAND: band select (tuner)
6. Cursor buttons and
conformation button
stop playback
7.
8. ST/PROG: stereo selection / program
tracks to be played (disc/USB/SD)
audio output method (DVD only)
Loudness ON/OFF
Use the [VOLI button to scroll (rotate) and select (push).
Directory list
TO see the track/chapter/images/folder
button and use the [VOL] button to scroll (rotate) and select (push).
Bluetooth operation
Pairing
To connect your Bluetooth device to the unit, you need to pair the device to the unit.
Pairing needs only to be done once. You can pair up to five devices.
1 . Turn on the Bluetooth
2. Search for Bluetooth
3. Select the Bluetooth device ID called 'RDD773BT
4. If requested enter default password "0000"
If pairing is successful "connected" will be shown on the display in Bluetooth mode.
Auto-Reconnection
Once a device is paired it will be automatically re-connected the next time.
Note that only one device can be connected to the unit at the same time.
Incoming Calls
• Answering an incoming call: press the GREEN button at an incoming call.
• Rejecting an incoming call: press the RED button at an incoming call.
• End a call: Press the RED button during a call.
A2DP (Bluetooth audio streaming)
If you connected a device with stored music and which supports the A2DP profile you
can play this music over you car speaker system.
1. Make sure your device is connected to the unit.
2. GO to the BT-music mode on the unit using the [MOD] button.
3. Start playing music on your device.
4. You can control the playback using the buttons [N/I«]
Input & Output
Front and Rear Pre-amp Output
The RCA outputs can found on the back of the unit (see connection diagram).
This output is for connecting an amplifier, equalizer, or other audio component that
requires a pre-amp out connection (Red=Right, White=Left). Follow the manufactures
instructions for the audio component that you are connecting.
Video Output
The RCA output can found on the back of the unit (see connection diagram).
This output (in yellow) is for connecting monitor(s). You must connect a monitor for car
in order to play this unit in another monitor. Consult your dealer for any kinds Of monitors
that are suitable to use in car.
Backup Camera Input
The RCA input can found on the back of the unit (see connection diagram).
This input (in yellow) is for connecting backup camera for parking. You must connect the
reverse wire (pink) to the reverse gear switch in order to activate this video input mode
when you switch the reverse gear of your car.
SUB output
The RCA output can found on the back of the unit (see connection diagram).
Follow the amplifier's installation instructions.
AUX input
The Aux input 3.5mm Jack connection is located on the front panel of the unit. Use the
[MOD] button to go to the AUX mode. Connect any portable audio device such as a
portable MP3 player to the unit. Use the controls on the device to control the playback.
AV input
The AV input is a set Of input on the rear Of the unit (video IN + AUX IN RCA's - see
connection diagram). Use the [MOD] button to go to the AV mode. Connect any portable
AV device such as a DVD player to unit. Use the controls on the device to control the
playback.
9. AMS/RPT: intro play stations (tuner)1
4
repeat options (discJLJSB/SD)
10. *Iseek: previous track (disc/USB/SD/
BT)/ frequency seek down (tuner)
11. LOC/RMD: local selection (tuner)/
15
shuffle play options (disc/USB/SD)
16
12. OSD: show playback Menu
17
(disc,'USB/SD)
18
13. PBC: playback control (disc/US3/SD)
19
20 14. Numeric buttons
21
15. TITLE: shows title (DVDonly)
22
16. SUB-T: subtitle select (DVD00)
23
24 17. SETUP: shows setup menu
25
18. ANGLE: change angle
(DVD only - if available)
19. SLOW: slow-motion playback
(DVD only)
26
20. Volume up
21. ZOOM: zoom steps (DVDonly)
22. SELECT: Audio menu
23. N/seek: next track (disc/USB/SD/BT) /
frequency seek up (tuner)
24. Volume down
25. AUDIO: change audio output method
(DVD onlY)
26. GO TO: Track time search
(disc,'USB/SD/BT)
which is on your disc/USB/SD, push the [APS]
function on the device.
devices with the device.
Caliber" in the pairing list.
(3) and (9) on the unit.