Setup Procedure For Your Computer's System - Sony PCLK-MN10A Bedienungsanleitung

Setup procedure for your computer's system

The following procedure is for Windows 98/98SE. Some parts of the
procedure may differ depending on which operating system you are
installing the driver to. See page 15 for Windows 2000, and page 17 for
Windows Me.
Setting up for Windows 98/98SE
1 Installing the USB driver
Start up Windows, and then quit any active applications.
1
Hook up the system (page 7).
"Add New Hardware Wizard" appears.
Note
It may be necessary to install three or more drivers for certain devices
before installing the PCLK-MN10-dedicated driver. The name of each
device for which a driver must be installed will appear in the dialog box.
b
Installing the standard driver supplied with Windows
for a device other than the PCLK-MN10
When requested to do so, click "Next," and then select "Search
for the best driver for your device. (Recommended)" option.
Then follow the instructions displayed by the wizard. Be sure
to have on hand the Windows 98/98SE CD-ROM containing
the required driver.
A driver must be
installed for this
device
9 GB