Sony PCLK-MN10A Bedienungsanleitung Seite 21

Setting up the CD-ROM drive
1
Open the Control Panel.
In the Start menu, point to "Settings" and click "Control Panel".
2
Double-click System icon.
The "System Properties" dialog box appears.
3
(For Windows 2000 only) Click the "Hardware" tab.
4
Click the "Device Manager" tab. (For Windows 2000, click the
"Device Manager" button, instead.)
The "Device Manager" dialog box appears.
5
Double-click"CDROM" (For Windows 2000, double-click "DVD/
CD-ROM drive" instead.)
6
Select the CD-ROM drive you want to use under "CDROM," and
then click the "Properties" button. (For Windows 2000, double-click
the CD-ROM drive under "DVD/CD-ROM drive" instead.)
The "System Properties" dialog box of the selected CD-ROM drive
appears.
Note
If necessary, you can select two or more CD-ROM drives in this procedure
as long as the drives are connected to your computer.
7
Click the "Properties" tab.
8
Check "Enable digital CD audio for this CD-ROM device," and
then click "OK."
The "System Properties" dialog box of the selected CD-ROM drive
closes.
(For Windows 2000 only) Click
dialog box.
9
Click "OK" to close the "System Properties" dialog box.
Go to "Installing the software" on page 22.
to close the "Device Manager"
21 GB