System Requirements - Sony PCLK-MN10A Bedienungsanleitung

System requirements

The following hardware and software are necessary to use the M-crew
(ver. 1.05E) software.
s IBM PC/AT or compatible (This software does not run on the Apple
Macintosh.)
s CPU*
s Video board and display driver:
s Hard disk space: 20 MB*
s CD-ROM drive*
s USB port:
s OS:
s Media player:
s Video monitor:
1
* The operation of M-crew is not guaranteed on some computers with Pentium-
compatible CPU chips, such as the AMD K6 (e.g., sound skipping may occur
during playing of an audio file).
* 2 Another 15 MB of hard disk space is required to install PictureGear Label
Maker.
3
* If your CD-ROM drive is connected to your computer through a SCSI
controller (including PCMCIA card type), you will be able to install the M-
crew software, but you will not be able to play an audio CD in the CD-ROM
drive.
Note
The PC LINK connector is not compatible with a CONTROL A 1 or A 1 II, or
CONTROL I connector. If your system stereo has a CONTROL A 1 or A 1 II
connector, you must use the PCLK-MD2 Connecting Kit (not supplied).
1 : Intel Pentium II 233 MHz/Celeron 300A or higher
VGA (800 × 600 pixels), 65,536 colors or more.
and on-line manual.)
3
1 or more
Windows 98/Windows 98SE/Windows 2000/
Windows Me (This software does not run on
Microsoft Windows 3.1, Windows 95 or Windows
NT.)
Windows Media Player (Before you can use the
M-crew software, you must first install Windows
Media Player (version 6.4 or higher) into your
computer.)
VGA (800 × 600 pixels), 65,536 colors or more.
2
or more (When installing both M-crew
5 GB