Herunterladen Diese Seite drucken

Beko HIXI 84700 UF Gebrauchsanleitung Seite 23

Vorschau ausblenden Andere Handbücher für HIXI 84700 UF:

Werbung

Elo
3. By tapping on the setting area or by
sliding your finger on the area, set the
temperature level between O and 9.
While the temperature level is increased
as 1,2,3...19 on some models, it may be
increased
as
other models. This varies as per product
model.
» The hob starts to operate. If another
hob is selected or if you wait for 10 sec-
onds without any operation, the light —
of the
key will fade.
O
The
hobs
with
left are described as an example.
If the hob zones on the right have
wide surfaces on your appliance,
the same apply for the hob zones
on the right.
Combination
of
with wide surface
or
both
of
the
hob
left are operating
with
wide
surfaces
on your hob)
While
one or both
are operating separately, you may com-
bine both hobs by activating the hob
with wide surface. In this way, you may
operate a wider hob surface with the
same
values.
1 .While
one
or both
the left areoperating,touch the l:] key.
» On both of the hob zone displays, the
hob zone with the lower degree will be
displayedand— lightof the I:] keywill
illuminate.
... 9. on some
wide
surface
on the
the
hob
zones
(flexi) while
one
zones
on
the
(if hob zones
are
available
of the hobs
on the left
O
of the
hob
zones
>>Combined hobs resume to operate
with the temperature of the hob zone
which have a lower degree and, if appli-
cable, with the timer setting value. Tem-
perature and timer values of the hob
zone that had a higher temperature
value before combinivyyill be cancelled.
3
>> To change the temperature value
afterwards, set the desired temperature
level from the setting area.
Turning
the hob zones with wide
surface
off (if hob zones with wide
surfaces
are available
[3 you may separateand set zones to
level zero by pressing the key.
High power
You may use the booster to heat with
maximum power. However, we do not
recommend cooking for a long period at
this position. High power setting may
not
be available
period for High power setting (See Op-
erating period limits table) has expired,
the
hob
zone
Selecting
(BOOSTER)
1.Turnthe hob on by touchingtheO
key.
2.Touch theo key of the hob you want.
The selected hob zone operates with
maximum power and 3 lights flash on
the hob zone display respectively.
When the period for High power setting
(See Operating period limits table) has
on
expired, hob zone will continue operat-
on the highest temperature level.
6
on your hob)
setting
(BOOSTER)
on all hobs.
When
is tumed
off.
high power
setting
directly:
the
23/EN

Werbung

loading