CYBEX Gold SOLUTION G2 Bedienungsanleitung Seite 38

REMOVING AND REATTACHING THE SEAT COVER
(15)
(9)
(2)
(4)
WARNING The car seat must never be used without the seat
2
cover. Ensure that only an original CYBEX seat cover is used, as
the cover is a key element of the seat's function.
The cover of the car seat consists of four parts (headrest (x2), back-
rest, booster). These are held in position at several places by press
studs, velcro and elastic bands.
To remove the covers, please follow the instructions below:
1. Open the velcro fastener behind the reclining headrest (15) and
pull it upwards.
2. To remove the main cover of the headrest, reach under the head-
rest (9), unhook the elastic bands, and pull off the cover.
3. To make it easier to remove the backrest (2) cover, fold the car
seat together and detach the cover at the six edges points (four
on the backrest and two on the booster). When you unfold the
car seat again, the backrest (2) cover can be easily removed.
4. To remove the booster cover, release the two elastic bands un-
derneath the booster (4), and first remove the cover around the
armrest. The booster cover can then be easily removed.
EN
38