Create Studio Benutzerhandbuch Seite 6

• After a long time of use, the coating on the surface of the inner pot may
appear discolored, but there is no problem in use and good influence on
health, you can use it safely. Do not use metal or rough cleaning tools to
clean, so as not to scratch or damage the coating.
• If there is a large amount of steam escaping around the lid, which is an ab-
normal phenomenon, unplug the power plug and stop using it. Check that
the lid is properly sealed, and if not, contact customer service for repair.
• Do not use components from non-designated manufacturers, which
could cause harm to users or pose a potential hazard.
• Remove the plug when cleaning the appliance or when it is not in use.
Make sure it is completely cool before installing, disassembling, and
cleaning.
• Children should be supervised to ensure that they do not play with the
device. Do not allow children under 8 years of age to handle this appli-
ance or its power cord.
• Cleaning and maintenance of electrical appliances should not be carried
out by children without supervision.
• The appliance cannot be used with an external timer or a separate re-
mote control system.
• This appliance is designed for domestic use. Do not use it for any other
purpose.
• The lid's safety opening and closing device ensures that the lid is sealed when pressure is
applied and unlocked when pressure is released. For safety, when the lid reaches 4 KPA it
closes and does not reopen until the pressure is lost.
• Pressure control safety device: If the set pressure is exceeded during cooking, the product
automatically shuts off, preventing further pressure build-up.
• The temperature-sensing device in direct contact with the bottom of the inner pot is
sensitive and can achieve precise temperature control, not only preventing the bottom
from burning during cooking, but also automatically shutting off the appliance when the
inner pot is empty or an abnormal temperature rise occurs.
• Pressure limiting safety device: When the temperature control device and pressure control
device fail and the working pressure reaches the limit value, the pressure limiting device is
activated to lower the pressure in the cooker.
• When the above devices fail and the pressure in the pot reaches the limit value, the sealing
ring and the inner pot produce gap exhaust pressure relief, if the gap is blocked by food,
the pressure will increase, and the increased pressure will cause a larger gap exhaust, so
the gap cannot be blocked to avoid the phenomenon of pot explosion.
• Overheating safety device: When the pot temperature reaches the limit, the fuse blows and
the power will be cut off to avoid dangerous situations.
E NGL I SH
6
SAFETY DEVICES