Create Studio Benutzerhandbuch Seite 12

Cleaning the float, exhaust pipe, locking nut and pressure relief valve:
• Rinse the exhaust pipe directly with water.
• To clean the float, simply remove the sealing ring connected to the float and rinse with
water. After cleaning, the sealing ring must be fixed on the float.
• The lock nut (must be cleaned regularly) and the pressure relief valve can be soaked or
rinsed with water and dried with a soft, dry cloth.
Pressure relief
valve
Cleaning the waste collector:
• Remove the waste collector, clean it with diluted neutral de-
tergent, and dry it with a soft cloth. Once dry, place it direct-
ly in its original position.
• It is recommended to clean the collector on the same day of use.
Cleaning other accessories:
• The rice spoon and measuring cup should be cleaned with diluted neutral detergent and
dried with a soft, dry cloth.
Note :
• Do not immerse or rinse any active parts, such as the main motor and power cord, directly
in water.
• Do not expose the product or its accessories to the sun.
• Do not wash the lid assembly in the dishwasher.
• Do not use oil, alcohol, thinner, etc. to clean the machine, otherwise it may damage the
product.
• Do not use steel balls or other hard objects to clean or scrub the inner tray.
• Do not use metal or other sharp utensils in the inner pot, otherwise you will damage the
non-stick coating, use a wooden or plastic shovel.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
E NGL I SH
12
Float
Lock nut
Exhaust
pipe
Waste
collector