GB
Charging the vacuum cleaner
Make sure that the vacuum cleaner is switched off.
Option 1: Direct charging of the hand-held appliance
1. Insert the mains plug into the charging socket on the back of the hand-held appliance below the handle.
2. Plug the mains adaptor into a functioning socket.
Option 2: Charging in the storage station
1. Insert the mains plug into the charging socket on the back of the storage station (see Fig. B).
2. Connect the mains adaptor to a functioning socket.
3. Place the device in the holder so that is makes contact for charging. The contacts are located on the back of the
suction pipe.
During the charging process, the battery indicator flashes white and the battery status on the LED display shows
the charge status (0-100) in per cent.
When the battery is fully charged, the battery indicator lights up continuously. The display switches off automati-
cally after 60 seconds.
Application
WARNING!
DANGER OF EXPLOSION
Liquids can form explosive vapours or mixtures by swirling with the suction air of the
vacuum cleaner.
Never suck up liquids with the vacuum cleaner.
WARNING!
DANGER OF FIRE
If you vacuum glowing ashes, burning cigarettes or similar with the vacuum cleaner,
the filters may catch fire.
Do not vacuum any glowing or smouldering materials or objects.
NOTE!
DANGER OF DAMAGE
Improper handling of the appliance may cause damage.
Do not vacuum sharp particles.
Make sure that the filters are correctly inserted and undamaged before switching
on the appliance.
22
Instruction manual