GB
Using the accessories
Accessory
Storage station with
charging function
2in1 crevice tool
Textile brush
Prior to first use
NOTE!
RISK OF DAMAGE!
If you open the packaging with a sharp knife or other sharp object without due
care, the handheld vacuum cleaner may become damaged.
Proceed carefully when opening.
1. Remove the handheld vacuum cleaner from the packaging.
2. Check that the delivery is complete.
3. Check if the handheld vacuum cleaner or individual parts have damage. If this is indeed the case, do not use the
handheld vacuum cleaner.
Preparing the charging station
1. Insert the charging station into the charging base until you hear a „click".
2. Position the charging station close to a properly installed power socket.
3. Insert the mains connector into the hole on the back of the charging base intended for this purpose.
4. Plug the power supply into a properly installed power socket.
Charging the handheld vacuum cleaner
1. Ensure that the handheld vacuum cleaner is switched off.
2. Plug the handheld vacuum cleaner into the charging base, as such that the charging contact is established.
Or plug the mains plug into the charging socket on the handle of the handheld vacuum cleaner.
22
Instruction manual
Image
Use
For storing the device and accessories
while it is charging.
With adjustable brush attachment.
For cleaning in tight and hard-to-reach corners
and recesses.
For cleaning upholstery, mattresses, etc.