JOOLZ Aer2 Gebrauchsanweisung Seite 15

ENGLISH
(For US, Canada and Australia, please refer to dedicated sections)
WARNING
+ Never leave the child unattended.
+ Ensure that all locking devices are
engaged before use.
+ To avoid injury, ensure that your
child/children are kept away when
adjusting, unfolding and folding this
product.
+ Do not let a child/children play with
this product.
+ Always use the restraint system.
+ Check that the pram body or seat
unit or car seat attachment devices
are correctly engaged before use.
+ This product is not suitable for
running or skating.
+ The seat unit is intended for children
from 0 months until 4 years, or
up to a maximum weight of 22 kg.
Whichever comes first.
+ Only use the most reclined position
of the seat for newborn babies.
+ The seat unit is only compatible
with the Joolz Aer2 chassis and vice
versa.
+ The brakes should always be
engaged when placing and
removing the children.
+ The maximum loading capacity of
the shopping basket is 8 kg.
+ The maximum loading capacity of
the backrest pocket is 2 kg.
+ Any load attached to the pushbar
and/or on the back of the backrest
and/or on the sides of the vehicle
will affect the stability of the vehicle.
+ Check the buggy chassis, seat unit
and accessories regularly for signs
of damage and tear. Do not use
the buggy if any of the parts are
damaged, torn or missing.
+ The seat unit can carry only one
child at a time.
28
+ Do not use accessories on this
product which are not approved by
Joolz.
+ Only use car seats, replacement or
spare parts and accessories that
are supplied or approved by Joolz.
+ Car seats used in conjunction with
a chassis do not replace a cot or
a bed. Should your child need to
sleep, then it should be placed in
a suitable crib, bed or approved
sleeping area based on your child's
requirements.
MAINTENANCE/WASHING
INSTRUCTIONS
The fabrics are detachable and
machine washable. Never use bleach
or other chemical detergents.
Periodically (approximately once a
month) treat the wheels and metal
parts with Teflon or silicon spray to
ensure the buggy continues to run
smoothly.
The aluminum parts of your Joolz
Aer2 buggy are coated to protect
it from external influences such as
corrosion. Coated aluminum parts
are vulnerable to acidic cleaners or
grease, which can cause stains and
discoloration of the aluminum parts.
We therefore advise you to clean the
aluminum parts of your buggy with
warm water and a soft cloth.
Safety was an important
consideration throughout the
development of the Joolz Aer2.
Our product therefore meets the
following safety standard:
Europe: EN 1888-2:2018+A1:2022
Please visit joolz.com or contact your
retailer for any questions and/or
comments.
Joolz Aer2
Instruction manual 29