SXT-Scooters COMPACT H300 Bedienungsanleitung Seite 33

A. Nuts, bolts, and structural
Due to vibration, nuts and bolts can become loose. Make sure that all fasteners are securely fastened and tighten if necessary.
Pick your scooter off the ground a few inches and you look at all visible nuts, bolts and structural welds. If anything sounds, feels or
looks loose or shows signs of stress then replace, or secure them. If you're not sure, ask someone with experience to check, or
ask an authorized dealer to show you what to look for in a mechanical safety check.
WARNING: Inspect unit before each use. Make any required adjustments, and replace or repair any item that may need it.
B. Tires and Wheels
Check that pneumatic tires are properly inflated. Refer to the sidewall of the tire for recommended PSI. Checking PSI using a tire
pressure gauge is recommended but you can also bounce your weight on the scooter and compare tire deflection to how it looks
when you know the tires are properly inflated. Spin the wheels and check that the tires have not yet reached the wear marks on the
tires, have ripped, torn, or show any signs of distress, and replace as neces- sary. Make sure the wheels spin freely and true. If wheels
wobble and/or rub the brakes then make proper adjustments before proceeding with the Mechanical Safety Check.
INsTrUcTIoNs sxT-scooTErs
13