Braking System - SXT-Scooters COMPACT H300 Bedienungsanleitung

Practice with your electric scooter as a PUSH SCOOTER until you feel comfortable riding
without the speed of the electric motors. Grasp the Foam Grips on the Handle Bars with
both hands, place one foot on the Deckboard, and push-off a few times with your other
foot to move for- ward.
Practice Starting the Drive System:
Your electric scooter has a unique power-saving, safety feature that ensures that the
electric motors do not engage until the vehicle is traveling in excess of 3 m.p.h.
To Accelerate:
Push-scoot your electric scooter to 3 m.p.h. and, when you are ready to accelerate, use
your right index finger to gently squeeze the Speed Controller Trigger located above the
right-hand Foam Grip. Your electric scooter electric motors are now engaged. Gently
continue squeezing the Speed Controller Trigger until you attain the desired speed. You
can control speeds within a range of 3mph to a maximum of 15mph.
Practice riding your TranSporter on a flat safe area. Go slowly and practice accelera-
ting, decelerating, and braking. Do not go any faster than your skills allow. ALWAYS
WEAR AN APPROVED SAFETY HELMET AND OTHER SAFETY GEAR WHEN RIDING
YOUR ELECTRIC SCOOTER.

Braking System:

THIS SECTION DESCRIBES BOTH AVAILABLE BRAKING SYSTEMS! PLEASE READ
CAREFULLY!
To Decelerate:
While riding your electric scooter with the electric motors engaged, release the Speed
Controller Trigger and the unit will coast. You can then engage available braking systems.
Braking System: Pull the hand brake lever to engage the rear brake.
Economy / Turbo Control System: Press the green switch on/off for 12kmh / 25kmh
speed (capacity in 65kgs) choice.
3
7
INsTrUcTIoNs sxT-scooTErs