Autool BT10 Bedienungsanleitung Seite 4

environmentally friendly manner. Use designated
electrical device collection points.
Electrical safety rules
Do not twist or severely bend the power cable, as this
may damage the internal wiring. If the power cable
shows any signs of damage, do not use the device.
Damaged cables pose a risk of electrical injury. Keep
the power cable away from heat sources, oil sources,
sharp edges, and moving parts. Damaged power
cables must be replaced by the manufacturer, their
technicians, or similarly qualified personnel to
prevent hazardous situations or injury.
Equipment safety rules
Never leave the device unattended when it is
powered on. Always disconnect the power cable and
ensure the device is turned off when it is not being
used for its intended purpose!
Do not attempt to repair the device yourself.
Before connecting the device to power, check that
the battery voltage matches the value specified on
the nameplate. Mismatched voltage can cause
serious hazards and damage the device.
It is essential to protect the device from rainwater,
moisture, mechanical damage, overload, and rough
handling.
Application
Before use, check the power cord, connection cables
for any damage. If any damage is found, do not
operate the device.
Use the device only in compliance with all safety
instructions, technical documents, and vehicle
manufacturer specifications.
If replacement accessories are needed, use only
brand new and unopened products.
Personnel protection safety rules
Protective gear may be worn when using this
product.
Do not connect or disconnect any test device while
3