Maintenance Service - Autool Bt10 Bedienungsanleitung

Continuing to drive the motor may cause damage.
To protect the motor, the fuse will blow.
Press the rocker switch to position "II" to start the
●
motor for releasing. The brake caliper will begin to
loosen. Once you release the switch, the button
will automatically reset. Pay attention to the motor
sound—after the motor has fully released, it will
begin to run idle. You should release the switch
promptly at this point.
If the behavior when pressing the rocker switch does
●
not match the description, it is possible that the
motor's forward and reverse directions are reversed.
Please pay special attention to this.

MAINTENANCE SERVICE

Our products are made of long-lasting and durable
●
materials, and we insist on perfect production
process. Each product leaves the factory after 35
procedures and 12 times of testing and inspection
work, which ensures that each product has excellent
quality and performance.
Maintenance
To maintain the performance and appearance of the
product, it is recommended that the following product
care guidelines be read carefully：
Be careful not to rub the product against rough
●
surfaces or wear the product, especially the sheet
metal housing.
Please regularly check the product parts that need
●
to be tightened and connected. If found loose,
please tighten it in time to ensure the safe operation
of the equipment. The external and internal parts of
the equipment in contact with various chemical
media should be frequently treated with anti-corro-
sion treatment such as rust removal and painting to
improve the corrosion resistance of the equipment
and extend its service life.
Comply with the safe operating procedures and do
●
not overload the equipment. The safety guards of
the products are complete and reliable.
6