Time-Setting Options; Changing The Time; Cooking Time - Constructa Cc4W91963 Gebrauchs- Und Montageanleitung

en Time-setting options
Press .
5.
After starting, the dish and weight cannot be
changed. The set weight can be displayed with
The appliance starts.
lights up.
You will see the cooking time counting down.
For some programmes, a short audible signal sounds
when you have to stir or turn the dish.
When the cooking time has elapsed:
6.
A signal sounds. The appliance stops heating.
Press .
9.4 Pausing operation
You can pause operation at any time.
10 Time-setting options

Time-setting options

Your appliance features time-setting options that you
can use to set the cooking time and the timer.
10.1 Checking the time-setting options
Requirement: If multiple time-setting options are set, the
corresponding symbols light up. During operation, the
timer and cooking time are available. In standby, the
timer and the time are available.
Press until , or
The respective value is shown in the display.
10.2 Changing the time
Requirement: To change the time on the clock, the ap-
pliance must be switched off.
Press twice.
1.
and the time appear on the display.
Set the time in the settings area.
2.
Press .
3.
The time is set.
If is not pressed, the set value is applied after a
few seconds.
Note: In order to reduce the energy consumption of
your appliance in standby, you can hide the time.
10.3 Cooking time
You can set a time after which operation ends automat-
ically. The maximum cooking time is 23 hours and 59
minutes.
Setting the cooking time
Set the type of heating and temperature.
1.
Press until is in focus.
2.
Set the required cooking time using the settings area.
3.
Press .
4.
The appliance starts.
lights up.
You will see the cooking time counting down.
Ending the cooking time
Requirement: A signal sounds. The appliance stops
heating. : is shown in the display.
Press .
1.
The signal is switched off.
52
is in focus.
Press or open the appliance door.
1.
Operation is paused.
. flashes.
To continue operation, close the appliance door and
2.
press .
Operation continues.
lights up.
9.5 Stopping operation
You can stop operation at any time.
Press .
The fan may continue to run after operation has been
paused or stopped.
The appliance stops any ongoing functions.
Press .
2.
The appliance is switched off.
Changing the cooking time
Use the settings area to change the cooking time.
After a few seconds, the display shows the changed

cooking time.

You will see the cooking time counting down.
Clearing the cooking time
If the timer function has been set, press
1.
Use the settings area to set the cooking time to
2.
After a few seconds, the cooking time is cleared. The
appliance does not interrupt operation.
10.4 Timer
You can set the time on the timer. Once this time has
elapsed, a signal tone sounds. You can set a maximum
time on the timer of 24 hours.
The function works independently of the operation and
other time-setting options. The timer signal is different
from other signals.
Setting the timer
Press until
1.
Use the settings area to set the required timer dura-
2.
tion.
After a few seconds, the appliance displays the set
timer duration.
The timer starts.
lights up in the display.
You will see the timer duration counting down.
Ending the timer
Requirement: A signal sounds.
display.
Press any symbol.
The timer is switched off.
Changing the timer
Use the settings area to change the required timer
duration.
After a few seconds, the appliance displays the set
timer duration.
is in focus.
: is shown in the
.
: .