Factory Reset - Mohlenhoff Alpha Smartware Rlds 61071-N6 Kurzanleitung Zur Installation

Factory reset

10 Factory reset
A factory reset resets the room control unit to the factory settings. The
pairing of the room control unit with the Base Station is cancelled. For
a simultaneous factory reset of several taught-in room control units, a
factory reset must be carried out at the Base Station.
DEU
If necessary, the pairing process must then be carried out again for a
room control unit that has been unpaired. Information on this process
ENG
can be found in the installation instructions for the Alpha Smartware
Base Station.
FRA
1. Press and hold
NDL
B Opens the settings
2. Press
ITA
3. Press
4. Press
ESP
5. Press and hold
DAN
B The reset process starts: The confirmation rAL (Reset all) is displayed.
NOR
FIN
A factory reset in cloud-based operation has no effect on log-
ging out the room control units in the Alpha Smart app. The de-
SWE
vices must be deleted manually in the Alpha Smart app.
POL
32
for > 3 seconds
to navigate to the menu rAL (Reset all) menu
to confirm the selection
in order to navigate to the menu item YES
for >3 seconds