Werbung
Changing the selection
System button: Press briefly (< 1 sec) to confirm selection
Press and hold (> 3 sec) to execute the selected function
5 Installation
see
[page 4]
B
5.1 Mounting with screws
1. Select a suitable mounting position
2. Ensure that no lines are laid at the installation
position.
3. Detach the device from the mounting base us-
ing a suitable screwdriver
4. Align the mounting base horizontally on the
wall
5. Mark two opposite drill holes using the
mounting base
Installation
DEU
ENG
FRA
NDL
ITA
ESP
DAN
NOR
FIN
SWE
POL
25
Werbung
