Verbindungen; Bluetooth; Bluetooth Eingeschaltet; Bluetooth Setup - Defelsko Positector Gls Hilfe

Verbindungen

Verbindungseinstellungen ihres Gerätes.

Bluetooth

Configure Bluetooth communication and connection options for the Gage.

Bluetooth eingeschaltet

Wenn BLE Keyboard eingeschaltet ist, kann das Messgerät mit einem Computer,
einem Smartphone oder Tablet via auto-pairing Bluetooth Smart (BLE)-Technologie
verbunden werden.

Bluetooth Setup

Setup options for Bluetooth input/output communication modes.

Input Devices

Displays the currently paired Bluetooth keyboard or barccde scanner. Use your
external Bluetooth keyboard or barcode scanner to conveniently enter reading and
batch annotations.
To add a new device, put your keyboard or barcode scanner into pairing mode, then
press Next. Select your input device from the displayed list. Once connected, the gage
will return to the main measurement screen. The Bluetooth input (keyboard) icon will be
displayed indicating a successful connection.

Keyboard

BLE Keyboard mode communicates wirelessly with your computer by emulating
keyboard keystrokes. When connected in this mode, PosiTector Advanced instruments
will be recognized as a simple Bluetooth keyboard. Each reading is typed, followed by
a carriage return (enter). This provides a simple way to capture readings as they are
taken without any special software, drivers or complex setup.
Mehr Informationen zum BLE Tastatur-Modus erhalten Sie hier
www.defelsko.com/connect

Power Off Time

By default, the PosiTector Advanced powers off after 5 minutes of inactivity. This power
off time interval can be adjusted when connected wirelessly via Bluetooth Smart to help
maintain connectivity while measuring. The interval is user selectable in 5-minute
increments up to a maximum of 60 minutes. Use the (-) and (+) buttons to adjust the
interval time, then select Ok.
Page 12