Westermann Cleanmeleon 2 PRO Betriebsanleitung Seite 139

16 Troubleshooting
Fault
Vehicle does not
start
Vehicle does not
drive
Attachment does
not turn
Hydraulic lifting
does not work
Cause
• No fuel in the tank
• Spark plug defective
• Accelerator pedal faulty
• Parking brake applied
• Gearbox in neutral
• V-belt defective / loose
• Hydraulic connections not
working properly
• Hydraulic oil level too low
• Control valve defective
• Too low pressure or volume • Consult specialist workshop
flow
• Hydraulic motor defective
• Hydraulic oil level too low
• Control valve defective
• Cylinder defective
Remedy
• Fill the fuel tank
• Replace spark plug
• Check throttle cable position
• Release the parking brake
• Turn the lever
• Replace or tension the V-belt
• Check the connections
• Top-up hydraulic oil
• Consult specialist workshop
• Consult specialist workshop
• Top-up hydraulic oil
• Consult specialist workshop
• Consult specialist workshop
51