Westermann Cleanmeleon 2 PRO Betriebsanleitung Seite 117

10 Start-up
10.1 Checking the engine before start-up
The following steps are to be carried out regularly before each use.
(Fig. 5 - Oil level)
a
(Fig. 6 - Sight glass)
(Fig. 7 - Fuel supply)
Checking the engine oil level
The oil quantity is checked with a dipstick! Pull dipstick
out:
NOTICE
Depending on the engine variant, the oil dipstick is located
on the side of the engine.
GXV 340 - dipstick direction of travel right B&S - dipstick
direction of travel right
Checking the hydraulic oil level
The oil quantity is checked using a dipstick!
NOTICE
The filling quantity of the hydraulic oil tank should
always be within the range shown
and 7 cm.
Oil quantity must be in the marked area!
Checking fuel tank contents
The amount of fuel is visually checked at the tank!
NOTICE
The fuel tank is located behind the driver's seat on
the right in the direction of travel.
Open the cover by turning it.
a
between 5 cm
29