Dometic AP Remote control Montage- Und Bedienungsanleitung Seite 7

Press and hold the button until the blind jolts once.

For multiple fabric panels, repeat the steps on a new channel for
each panel.
Additional blind configurations
Buttons on the remote control retain their function even with different
blind types (see: Changing channels
notes on operating the blind
Operate the blind as follows:

These instructions are valid for Skysol powered roofblind (SPR),
Skyscreen powered (SSP) and Skysol powered blinds (PB2).
To operate electrically powered blinds with two fabric panels
stacked on each side, proceed as follows:




on page 4 and General
on page 4).
To operate electrically powered blinds with two fabric panels
stacked on one side, proceed as follows:



Lock channel
NOTE When channels are locked, only active channels are
shown.
SET
Press and hold button on the back of the remote control for
about 10 s .

Within 6 s , select the channel to be locked using the channel
selector.

EN
7