Safety Instructions - Elero Rolmotion/D+ M Nutzungsinformation

RolMotion/D+ M Roller Shutter Drive
USage information
Operating and assembly
1
instructions
2 General information on these instructions
2.1 Standards and guidelines
2.2 Intended use
2.3 Foreseeable misuse
2.4 Warranty and liability
2.5 Customer service provided by the manufacturer 2
3 Safety
3.1 General safety instructions
3.2 Layout of safety instructions
4 Product description
4.1 Product contents
4.2 Accessories
5 Assembly
5.1 Mechanical fastening
5.2 Electrical connection
5.3 Connection example for RolMotion/D+ M
230 V / 50 Hz
5.4 Parallel circuit
5.5 Commissioning
5.5.1 Connection for assembly cable
5.5.2 Automatic configuration of end positions
5.5.3 Changing / deleting the limit positions
6 Travel profiles
6.1 Standard mode
6.2 Quiet mode
6.3 Changing the travel profile
7 Troubleshooting
8 Servicing
9 Service/manufacturer's address
10 Repairs
11 Disassembly and disposal
12 Comments on EU Declaration of Conformity 7
13 Energy efficiency
14 Technical data and dimensions
14.1 RolMotion/D+ M
Link to this usage information
1
https://elero.com/en/downloads-service/downloads/
1
2
2

Safety instructions

2
WARNING: Important safety instructions. For the safety of
2
persons, it is important to follow the general safety instruc-
tions enclosed with each drive unit.
https://elero.de/anleitung-sicherheit-antriebe
2
I
nstallation requires a qualified
electrician
2
More informationen:
elero.de/anleitung-sicherheit-antriebe
2
3
Measure to ensure electrical safety: Qualification as a
'qualified electrician for specified activities' (EFKffT) is re-
3
quired. Failure to fulfil the minimum requirements or disre-
gard may result in personal liability for damage to property
3
and personal injury.
3
4
RolMotion/D+ M Roller Shutter Drive
4
1 Operating and assembly instructions
Follow these instructions for safe and proper use. Observe
5
all assembly instructions. Incorrect assembly can lead to
serious injuries. Please keep this operating manual for fu-
5
ture reference to ensure that it can be accessed throughout
the entire service life of the product!
5
The German operating manual is the original version.
5
All documents in other languages are translations of the
5
original version.
All rights reserved in the case of patent, utility model or
5
design registrations.
6
2 General information on these instructions
6
The content structure is based on the life cycles of the elec-
tric motor drive (hereinafter referred to as "the product").
6
The manufacturer reserves the right to make changes to
6
the technical data in these operating instructions. In some
cases, this technical data may differ from those of the
6
respective product version; however, the functional informa-
tion will not undergo significant changes or become invalid.
6
The current version of the technical specifications may be
requested from the manufacturer at any time. No claims
6
may be asserted against the manufacturer as a result of this
provision. Deviations from textual or visual statements may
7
occur depending on the product's technical development,
features and accessories. Deviating information for special
7
versions will be provided by the manufacturer in the sales
documentation. Other information shall remain unaffected
by these provisions.
7
2.1 Standards and guidelines
7
During construction, the fundamental health and safety
requirements were applied and provision was made for the
8
appropriate legislation, standards, directives and guidelines.
The safety of the product is confirmed by the declaration
13 825.1201_EN_0525