Taking Out Of Operation And Cleaning - Vevor Js-Fb13F-T Bedienungsanleitung

10-30cm
a
Correct
b
Incorrect

Taking Out of Operation and Cleaning

1. Turn the machine off. Activate the trigger guard so that the coating
material in the spray gun flows back into the container.
2. Release the container by clockwise turning the container. Empty any
remaining paint back into the material tin.
3. Pre-clean the container and feed tube with a brush.
4. Pour solvent or water into the container. Attach the container back
on.
Use only solvents with a flashpoint over 55°C
5. Turn on the machine and spray the solvent or water into a container
or a cloth.
6. Repeat the above procedure until the solvent or water emerging from
the nozzle is clear.
7. Turn the machine off.
8. Then empty the container completely. Always keep the container seal
free of coating material residue and check for damage.
9. Disassemble the nozzle parts and clean each part separately.
B
B
A
A
11