Ace instruments KETOSCAN Lite Bedienungsanleitung Seite 46

WILL THERE BE A WARNING BEFORE THE ACE
KETOSCAN LITE IS DEACTIVATED AFTER 300 TESTS?
Yes, there is a warning that appears before the ACE KE-
TOSCAN Lite is deactivated. When the ACE KETOSCAN
Lite has reached 300 tests, you will see „SEn" on the
display. „Sen" means that you have reached 300 test
cycles and have to recalibrate the device. This is to en-
sure this sensitive device continues to provide accurate
results. For a calibration please contact the seller or a
local service provider. Information on calibration can be
found on the Calibration Return Receipt.
IS IT POSSIBLE TO READ THE NUMBER OF TESTS
REMAINING UNTIL THE NEXT CALIBRATION DIRECTLY
ON THE KETOSCAN LITE?
No, this is not possible. However, after the 300th test,
a call sign (!) is displayed on the ACE KETOSCAN Lite.
As soon as this call sign is displayed, the device should
be sent in for calibration. This prevents the device from
being unusable due to the lock after the 300th test.
IS IT POSSIBLE TO SYNCHRONISE THE KETOSCAN
LITE APP WITH THE APPLE HEALTH APP?
®
Yes, but the data from the KETOSCAN Lite App can-
not be transferred to the Apple Health App. However,
®
the KETOSCAN Lite App retrieves some data from the
Apple Health App. These retrieved data are „Weight"
®
and „Calories burned and consumed" and they are di-
splayed in the KETOSCAN Lite App in the results. If you
want to synchronise the data from the Apple Health
®
App with the KETOSCAN Lite App, select the menu item
„Settings" in the KETOSCAN Lite App and then „Syn-
chronization" (it is shown in the second last position in
the selection list). If you have selected „Synchroniza-
tion", you can check „Apple Health App" and the syn-
®
chronization is set.
46