ACD R4 ALULINE Bedienungsanleitung Seite 25
Verfügbare Sprachen
Verfügbare Sprachen
Page 1
Façade
Assemble the ridge plate with the bulges pointing downward, in the bolt slots. You assemble 2 façades.
Mount the profiles FA & FB with the small hole (Ø3) towards the ridge side (see detail 10).
Page 2
Stop bolts
!10! stop bolts are placed per facade!!!
Page 3
Sidewall + stop bolts
Stop bolts are placed on each sidewall (see detail 1 and detail 5). You assemble 2 sidewalls in total.
Number of stop bolts per sidewall:
Greenhouses with less than 7 windows:
-
-
Greenhouses with 7 or 8 windows:
Greenhouses with 9 or 10 windows:
-
-
The length of Profiles A & B depend on the type of greenhouse you have purchased.
R404
2981
Page 4
Assembly
Repeat pages 1,2 and 3 for the second gable and side wall. You now have 2 gables and 2 sidewalls.
Slide the panels one into the other until the end, the stop bolts are immediately tightened firmly and definitively.
Page 5
Roof
-
The lengt of Profile B and Profile C depend on the type of greenhouse you have purchased.
PROFIEL B:
R404
2158
R404
PROFIEL C:
2981
-
First install the ridge (profile C) on top of the 2 façades and fix it definitively with the stop bolts.
-
Greenhouses that are 7 & 8 windows long are provided with 2 glass rods (profile A) of each 2 stop bolts.
-
Place the glass rods (profiles A) between the sidewall and the ridge you just put in place (profile C) .
-
Assemble the traction strips (profiles B) to the ridge (profile C) in the corner and subsequently together
with the glass rod (profile A) at the sidewall.
ATTENTION: the traction strips start from the façade in the ridge and go down to the gutter. (See detail page 6)
ATTENTION: If you bought a ridge decoration, mount it on the ridge profile before mounting the ridge profile itself
R405
R406
R407
R408
3720
4458
5196
5935
R405
R406
R407
R408
2500
2500
2992
2992
R405
R406
R407
R408
3720
4458
5196
5935
2 stop bolts per side wall
3 stop bolts per sidewall. Place an extra stop bolt at detail 1 and
slide it into the middle of the profile.
4 stop bolts per side wall. Place 2 extra stop bolts at detail 1 and
slide it into the middle of the profile.
R409
R410
6673
7412
Extra profiel:
R409
R410
2992
2500
R409
R410
6673
7412
N
R404
R405
R406
R407
R408
R409
R410
2530
