Werbung
CLEANING
WARNING: Ensure that the fan is switched off from the supply mains before
removing the air filter screen.
1. Clean the air filter screen (map 1)
Cut off the power supply, pull the handle of air filter screen, remove it from
appliance. Clean the air filter screen with neutral detergent and banister brush,
then clean it with clear water. Finally, reinstall to the appliance.
2. Clean the wetted pad (map2)
Cut off the power supply, take down the air filter screen, then draw the wetted pad
from support. Clean the wetted pad with neutral detergent and banister brush, then
clean it with clear water. Finally, reinstall to the appliance.
Attention: the wetted pad must be installed horizontally, in order to avoid leaking.
3. Clean the water tank (map 3)
Cut off the power supply, open the door, take out the water tank, clean it with
neutral detergent, and wash it with clear water, then reinstall to the appliance.
4. Clean the shell
Clean with neutral detergent and soft cloth.
Attention: cut off the power supply when clean the appliance as there have a high
pressure in the body. Do not leave any water on the surface of control panel.
5. Clean the water pump:
1.Remove the foam
around the pump
2.Secure the pump to
the trough at the
bottom of the tank
5
3.Rotate the tablet onto
the water pump to
secure the water pump
EN
Werbung
