Troubleshooting; Possible Cause - Scheppach Nts20 Originalbetriebsanleitung

13. Troubleshooting

Fault

Possible cause

Check whether the plug is plugged in. Plug the mains plug back in to the socket.
Check whether there is power to the
Motor does not
socket.
run
Check whether the vacuum cleaner
on/off switch is switched on.
Is the brush blocked?
Reduced
vacuuming power Is the dust bag full of dust?
Is the filter full of dust?
Remedy
Call an electrician.
Switch the on/off switch on.
Switch the vacuum cleaner off to remove the
blockages.
Remove and empty the dust bag.
Remove and empty the filter.
www.scheppach.com GB | 21